Global-E-Systems introduces the accelerator of the energy transition: the Caldameg™ ‘CO2 heat pump + buffer’ system as a complete replacement for the gas boiler. The systems in the power ratings of 34kW, 70kW and 140kW are designed for collective - commercial - and industrial applications in existing buildings. For example, collective heating in apartment buildings or sanitary hot water supply in hotels, sports halls and swimming pools that have a high hot water demand due to the number of showers. Thanks to the modular design, the system can be integrated into any development project. The system is an ideal addition for zero on the meter projects and a catalyst for the transition to “all electric” buildings.
The heat pump keeps one or more buffer tanks warm. The coupling of a series of buffer tanks ensures a good stratification required for a high thermal efficiency of the heat pump. By means of temperature sensors in the buffer tanks, the heat pump can constantly supply a reserve of hot water at the desired temperature. Via a heat exchanger this heat can be used at a later moment for hot tapwater or central heating.
The buffer vessels are filled with PCM balls. This is an encapsulation of Phase Change Materials with a diameter of 80Ø manufactured from a high quality polymer. The application of PCM increases the effective capacity of the storage system by a factor of 4. Phase change materials can store more thermal energy than water. Supply and demand of heat can be disconnected using phase change materials. The required PCM bulbs are delivered on pallets with the total quantity for the selected system. During the melting process the volume of the energy storage system increases. To compensate for this increase, the installation of an expansion device is required.
The Caldameg™ Heating System consists of an efficient 34kW, 70kW or 140kW CO2 heat pump (air/water) of in combination with three PCM buffer tanks of 500, 1000 or 2000 litres. The CO2 heat pump is unique because of the high temperature output of 80°C. A high output temperature is necessary when you want to connect the heat pump to radiators or convectors. The existing installation in the building does not need to be fully adapted. The system is therefore ideal for renovation. Another advantage is that the CO2 heat pumps achieve better efficiency in the winter. In comparison to a traditional heat pump, a CO2 heat pump can handle much better with very cold outside temperatures. CO2 is a natural gas and more environmentally friendly than its chemical counterparts. The hydraulic scheme is indicative. There are several connection options. The CO2 heat pump is also suitable for direct tap water preparation. Do you have questions about specific applications? Please feel free to contact us.
|Power supply ||400V/50Hz||400V/50Hz||400V/50Hz|
|Heating capacity 1*||34kW||70kW||140kW|
|Power consumption 1*||8.5kW||18kW||31kW|
|Minimum outlet temperature||50°C ||50°C ||50°C |
|Maximum outlet temperature||85°C||85°C||85°C|
|Minimum inlet temperature||5°C||5°C||5°C|
|Maximum outlet temperature||45°C||45°C||45°C|
|Min/max outdoor temperature||-25°C - 43°C||-25°C - 43°C||-25°C - 43°C|
|Max. water flow rate||0.72m3/h ||1.2m3/h||2.3 m3/h|
|Noise level 2*||≤ 56dB(A)||≤ 63dB(A)||≤ 78dB(A)|
|Weight||360 kg||750 kg||1400 kg|
|Dimensions (L x B x H)||1472 x 1100 x 2295 mm||2362 x 1100 x 2295 mm||2361 x 2200 x 2295 mm|
|Colour||RAL 7043 (traffic gray B)||RAL 7043 (traffic gray B)||RAL 7043 (traffic gray B)|
|Water side pressure drop||± 35 kPa||± 35 kPa||± 30 kPa|
|Water side connections||2 x 1¼”||2 x 1½” ||2 x 2”|
1* At an outside temperature of 20ºC, an inlet temperature of 15°C and an outlet temperature of 65°C.
2* The sound level is an average of 9 measured positions at a distance of 1 meter in a soundproof room.
|Capacity||500 liter||1000 liter||2000 liter|
|Empty weight||135 kg||200 kg||250 kg|
|Operating Weight||517 kg||964 kg||1778 kg|
|Dimensions H X Ø||1790 x 650 mm ||1930 x 850 mm||2010 x 1200 mm|
|Tilt size||1830 mm||2010 mm||2180 mm|
|Material||Steel (S235JRG2)||Steel (S235JRG2)||Steel (S235JRG2)|
|Max. operating temperature ||95°C||95°C||95°C|
|Operating pressure||3 bar||3 bar||3 bar|
|Energy storage capacity 1*||21 kWh||42 kWh||84 kWh|
|Insulation material||Polystyrene 80 mm||Polystyrene 100 mm||Polystyrene 100 mm|
|Finishing insulation||PVC (grey)||PVC (grey)||PVC (grey)|
1* Fully charged buffer tank filled with PCM78 balls